Verilink WANsuite 5230 (34-00304.F) Product Manual Instrukcja Użytkownika Pobierz pdf (Strona 167)

VT100 Interface 4-51

“No Sync” is displayed. If the receiver is in pattern sync, “In Sync” is

displayed.

Elapsed Time

Displays the time elapsed since a timed test began or, if completed, the total

test time.

Bit Errors

Displays the total number of bit errors detected since the test began or since

error statistics were cleared.

Errored Seconds

Displays the number of asynchronous errored seconds that have been detected

since the test began or since error statistics were last cleared.

%EFS

Displays the percentage of time that the test ran error-free. This ratio is

derived from the number of error-free seconds divided by the number of

seconds accumulated in Elapsed Time.

Loop Table on Network Interface Test Details Screen

The Loop table lets you specify the type of Loop test to be performed. The

types of tests available for you to choose from depend on the currently

selected interface. Loopback diagrams are displayed in Line Loopback (LLB)

and Maintenance Loopback (MLB) shown on page A-3 and Port Loop and

V.54 Loopback shown on page A-3.

Values: No Test (Loop Down), line loopback (LLB), and maintenance

loopback (MLB)

Default: No Test (Loop Down)

Figure 4.43

Serial Interface Test Details Screen

BERT Table on Serial Interface Test Details Screen

The BERT table lets you set the test parameters listed below.

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 232 233

Brak uwag

Verilink WANsuite 5230 (34-00304.F) Product Manual Instrukcja Użytkownika Strona 167