Verilink T1 Access Router (34-00327) Product Manual Instrukcja Użytkownika Pobierz pdf (Strona 173)

VT100 Interface 4-65

Figure 4.60

Static TCP Translation Details Screen

NAT Ports Screen

The parameters on the NAT Ports screen (Figure 4.61) define the NAT global/

Internet and local/Corporate ports. These parameters are configured in the

NAT Ports Details screen shown in Figure 4.62. Access the NAT Ports Details

screen by selecting the <Ndx> number of the desired port on the NAT Ports

screen.

Figure 4.61

NAT Ports Screen

Enable

Enables or disables the NAT port. Default is “Enable.”

Default Translation

Forces translation on a specific IP port regardless of the source IP Address. If

Default Translation is set to “Enable,” the packet will never be discarded, but

will always pass through the translation path. Therefore, any packets with a

destination address different from the global/Internet network address will be

processed by the IP Gateway, and may be routed to another port. If this

parameter is set to “Disable,” no packet with a destination address different

from the global/Internet address will be processed. Setting this parameter to

1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 196 197

Brak uwag

Verilink T1 Access Router (34-00327) Product Manual Instrukcja Użytkownika Strona 173