Verilink WANsuite 5165 (34-00301.H) Product Manual Instrukcja Użytkownika Strona 205

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 235
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 204
VT100 Interface 4-81
DHCP Server Details Screen
The DHCP Server Details screen (Figure 4.77) lets you configure the
parameters described below.
Figure 4.77
DHCP Server Details Screen
Enable
Enables or disables the DHCP Server. Default is “Disable.”
Number of Ports
Defines the number of DHCP ports to be used. In this version, only “1” is a
valid value.
TTL
Time to Live for any DHCP packet. Default is 64.
Service Type
Type of Service used by the DHCP Server packet. Default is 1.
Lease Time
Tells the DHCP client the number of seconds it can retain this IP address. The
client should make a new DHCP request within the specified amount of time
to ensure the IP address is not given to another PC. Default is 600 seconds.
Primary DNS IP Addr
If requested by DHCP client, the client then uses this address to resolve
names of IP addresses. Default is 0.0.0.0.
Secondary DNS IP
Addr
If requested by DHCP client, the client then uses this secondary address to
resolve names of IP addresses. Default is 0.0.0.0.
Domain Name
Domain name to be used by all DHCP clients. Default is user’s server.
Router IP Addr
IP address that all clients use for Gateway or Router. Default is 0.0.0.0.
Primary WINS IP
Addr
If requested by DHCP client, the client then uses this address to resolve
names of IP addresses. Default is 0.0.0.0.
Secondary WINS IP
Addr
If requested by DHCP client, the client then uses this secondary address to
resolve names of IP addresses. Default is 0.0.0.0.
Przeglądanie stron 204
1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 234 235

Komentarze do niniejszej Instrukcji

Brak uwag