Verilink WANsuite 5330 (34-00302.F) Product Manual Instrukcja Użytkownika Pobierz pdf (Strona 79)

VT100 Interface 4-1

C HAPTER

HAPTER

VT100 I

NTERFACE

Introduction

This chapter describes the menus and options associated with the WANsuite

5330’s VT100 interface. The screens displayed throughout this chapter were

accessed through a TELNET session.

Accessing the VT100 Interface

You can access the VT100 interface locally via the Supervisory port or

remotely through a TELNET session. To access the VT 100 screens locally,

verify the Supervisory type is “tty” and the Supervisory port speed matches

the terminal emulation program that’s being used. (Port speeds supported

include the following: 1200, 2400, 4800, 9600, 19200, 38400, 57600, and

115200 bps.) You can access the VT100 interface remotely by opening a

TELNET session, entering the unit’s IP address, and connecting to the unit.

Screen Components

The VT100 terminal screens have several components common to all screens

(see Figure 4.1 below). These components include the device type (Verilink

WANsuite 5330), which is centered on the screen, the software and hardware

revision numbers (upper left), the date and time (upper right), the menu title

(“Main” in the figure below), and the serial number under which the unit is

operating.

Figure 4.1

VT100 Terminal Screen Components

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 134 135

Brak uwag

Verilink WANsuite 5330 (34-00302.F) Product Manual Instrukcja Użytkownika Strona 79