Verilink 2048 (34-00179) Product Manual Instrukcja Użytkownika Strona 14

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 33
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 13
Installation 2-72048 PMU/NTU
This port is a serial RS232 DCE port configured for 8 bits,
no parity, and 1 stop bit.
2.8.3 User Port
The USER port (labeled ‘USER – IN/OUT’) is located on
the rear panel. The function of this port is identical to that of
the PTT port with the following exception. The USER port
does not allow the clearing of PTT data and the PTT port
does not allow clearing the USER data. This is explained
further in Section 4.4 on page 4-5. The physical connection
is a 6-pin modular connector with the following pinout
assignments.
2.8.4 Chassis Network Management
The operation of the EM8000 in the 12-slot chassis is simi-
lar to the stand-alone operation. Within the chassis, each
element is physically connected to the next element in a
daisy chain fashion. Signals from all modules are gathered
and presented on consolidated 6-pin modular connectors on
the rear panel, labeled ‘NMS IN’ and ‘NMS OUT’. The
front panel ‘SUPV’ port operates in the same fashion as in
the stand-alone unit.
When used in the chassis, the communications bus is auto-
matically tied into each unit, allowing single point interfac-
ing to the chassis. Cards may be inserted and removed from
Pin PTT In PTT Out
1 Not Used Not Used
2 Signal Ground Signal Ground
3 Data Out Data Out
4 Data In Not Used
5 Signal Ground Signal Ground
6 Not Used Not Used
Pin USER In USER Out
1 Not Used Not Used
2 Signal Ground Signal Ground
3 Data Out Data Out
4 Data In Not Used
5 Signal Ground Signal Ground
6 Not Used Not Used
J12
J13
J14
J15
J16
J4
J5
J6
J7
J8
J12
J13
J14
J15
J16
J4
J5
J6
J7
J8
Figure 2-4 75 ¾ Jumper Configuration
Front
Network
Equipment
Front
Network
Equipment
NO NC
J18
NO NC
J18
Rear Rear
Przeglądanie stron 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 32 33

Komentarze do niniejszej Instrukcji

Brak uwag