Verilink SCC 2020 (880-503268-001) Product Manual Instrukcja Użytkownika Pobierz pdf (Strona 20)

Quick Set-Up

2

-6

Verilink SCC 2020 User Manual

Now type “

D2”

, the prompt

enter port 2 channels >

enter port 2 channels >enter port 2 channels >

enter port 2 channels >

appears. Type

“

13-24”

. Press

E

NTER

by itself to refresh the display with the DS0

assignments.

Figure 2-4 DIU 2130 Configuration Menu

Lead toggles are used to determine whether the control leads on

the synchronous serial interface will function in the normal way or

be forced on. When the DTE does not assert control leads they can

be forced on by typing the three letter abbreviation of the control

lead. For this example the DTE supports normal control lead

operation and the default values are appropriate.

Mode is used to determine the data rate of each of the timeslots

assigned to the port. In the case of an AMI T1 circuit the mode must

be 56K. For the B8ZS T1 used in this example, 64K gives the user

greater throughput. Use the

M1

and

M2

commands to set both data

ports to 64K per DS0.

The remaining options are correct for this example. The T1 circuit

and DTE should now be connected.

Once the CSU has been connected to the T1 circuit for at least

fifteen minutes, meaningful performance statistics will be available

under the

Performance Menu

, see Chapter 4 for more details.

Within 15 seconds of connecting the T1 circuit, the NET LED on the

front of the SCC 2020 should change from red to green. If it does

not, the

Diagnostics Menu

may be used for troubleshooting, see

Chapter 5 for more information on diagnostics.

--- DIU 2130 CONFIGURATION/DIAGNOSTIC MENU ---

--- DIU 2130 CONFIGURATION/DIAGNOSTIC MENU --- --- DIU 2130 CONFIGURATION/DIAGNOSTIC MENU ---

--- DIU 2130 CONFIGURATION/DIAGNOSTIC MENU ---

C) CSU [ 1,1 ]

C) CSU [ 1,1 ]C) CSU [ 1,1 ]

C) CSU [ 1,1 ]

T) timing source CSU

T) timing source CSUT) timing source CSU

T) timing source CSU

chnl 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

chnl 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 chnl 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

chnl 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Dp)port 01 01 01 01 01 01 01 01 01 01 01 01 02 02 02 02 02 02 02 02 02 02 02 02

Dp)port 01 01 01 01 01 01 01 01 01 01 01 01 02 02 02 02 02 02 02 02 02 02 02 02Dp)port 01 01 01 01 01 01 01 01 01 01 01 01 02 02 02 02 02 02 02 02 02 02 02 02

Dp)port 01 01 01 01 01 01 01 01 01 01 01 01 02 02 02 02 02 02 02 02 02 02 02 02

Lead Toggles DTR) DSR) RTS) CTS) DCD)

Lead Toggles DTR) DSR) RTS) CTS) DCD) Lead Toggles DTR) DSR) RTS) CTS) DCD)

Lead Toggles DTR) DSR) RTS) CTS) DCD)

Forced Ports -/- -/- -/- -/- -/-

Forced Ports -/- -/- -/- -/- -/- Forced Ports -/- -/- -/- -/- -/-

Forced Ports -/- -/- -/- -/- -/-

Port 1 Port 2 Statistics

Port 1 Port 2 Statistics Port 1 Port 2 Statistics

Port 1 Port 2 Statistics

Mp) mode 56K 56K FW/HW Rev.............1.6/0.8

Mp) mode 56K 56K FW/HW Rev.............1.6/0.8Mp) mode 56K 56K FW/HW Rev.............1.6/0.8

Mp) mode 56K 56K FW/HW Rev.............1.6/0.8

Sp) scram/hdlc inv N/N N/N Battery...............OK

Sp) scram/hdlc inv N/N N/N Battery...............OKSp) scram/hdlc inv N/N N/N Battery...............OK

Sp) scram/hdlc inv N/N N/N Battery...............OK

Kp) clocking ST ST DTE Intf..............V.35/V.35

Kp) clocking ST ST DTE Intf..............V.35/V.35Kp) clocking ST ST DTE Intf..............V.35/V.35

Kp) clocking ST ST DTE Intf..............V.35/V.35

Gp) LOS lead NONE NONE Data bus..............A

Gp) LOS lead NONE NONE Data bus..............AGp) LOS lead NONE NONE Data bus..............A

Gp) LOS lead NONE NONE Data bus..............A

Ep) enable loop YES YES Tp) test and monitor BEC

Ep) enable loop YES YES Tp) test and monitor BECEp) enable loop YES YES Tp) test and monitor BEC

Ep) enable loop YES YES Tp) test and monitor BEC

Np) near loopback OFF OFF Pp) monitor leads and status

Np) near loopback OFF OFF Pp) monitor leads and statusNp) near loopback OFF OFF Pp) monitor leads and status

Np) near loopback OFF OFF Pp) monitor leads and status

Fp) far loopback ON OFF A) Alarm Enable......YES

Fp) far loopback ON OFF A) Alarm Enable......YESFp) far loopback ON OFF A) Alarm Enable......YES

Fp) far loopback ON OFF A) Alarm Enable......YES

[1,2] DIU 2130 >

[1,2] DIU 2130 >[1,2] DIU 2130 >

[1,2] DIU 2130 >

Verilink SCC 2020 (880-503268-001) Product Manual Instrukcja Użytkownika Strona 20

Komentarze do niniejszej Instrukcji

Verilink SCC 2020 (880-503268-001) Product Manual Instrukcja Użytkownika Strona 20

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Verilink SCC 2020 (880-503268-001) Product Manual