Verilink C100 (880-502893-001) Product Manual Instrukcja Użytkownika Pobierz pdf (Strona 111)

Interfaces and Cables

6/15/99

Verilink C100 and C150 T1/FT1 CSU/DSU

C-5

Console IN

Interface

The Console IN Interface is a 6-position modular connector. This

connector is used to connect the console or modem to the T-1

CSU/DSU. The 6-position modular cable with the DB25 male hood

supplied with the unit is connected to the ASCII terminal. The cable

and 25 pin hood are described at the end of this section. The interface

pins on the 6 position modular connector are described as follows:

Table C-5 6-Position Modular Console IN Connector on Rear of Unit

Console OUT

Interface

The Console OUT Interface is a 6-position modular connector. This

connector is used to connect the Verilink T-1 CSU/DSU to another

Verilink T-1 CSU/DSU. Up to eight units may be connected together in

this fashion so that only one console or modem is needed. When

connecting units in this way the DB25 hood to modular connector

provided is only needed on the first T-1 CSU/DSU. To connect

additional T-1 CSU/DSUs, connect Console OUT on the first unit to

Console IN on the second unit using the cable provided. The interface

pins on the 6 position modular connector marked Console OUT are

described as follows.

Table C-6 6-Position Modular Console OUT Connector on Rear of Unit

Pin Number Signal Name Direction

1 Received Data to T-1 CSU/DSU

2 Ground both ways

3 RLSD or Carrier to T-1 CSU/DSU

4 Data Terminal Ready from T-1 CSU/DSU

5 Data Set Ready to T-1 CSU/DSU

6 Transmitted Data from T-1 CSU/DSU

Pin Number Signal Name Direction

1 Received Data to next T-1 CSU/DSU

2 Ground both ways

3 no connection

4 no connection

5 no connection

6 Transmitted Data from next T-1 CSU/DSU

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 134 135

Brak uwag

Verilink C100 (880-502893-001) Product Manual Instrukcja Użytkownika Strona 111