Verilink DIDCSU 2912 (880-502646-001) Product Manual Instrukcja Użytkownika Pobierz pdf (Strona 34)

DIDCSU 2912 Quick Set-Up

2-16

Verilink DIDCSU 2912 User Manual

Select FASE Alarm

Category

16. Type “S1”, then “2” to select Major as the alarm category for

Frame Alignment Signal Errors on Net Port 1. Type “S2”, then

“2” to set the same for Net Port 2.

Select E1 Framing

Type

17. Type “M1”, then “2” to select Common Channel Signaling (CCS)

as the E1 framing type on Net Port 1. Type “M2”, then “2” to

set the same for Net Port 2.

Set Alarm Declare

Time to 2 Seconds

18. Type “N1”, then “2” to set the number of elapsed seconds

before declaring an alarm condition for Net Port 1. Type “N2”,

then “2” to set the number of elapsed seconds before

declaring an alarm condition for Net Port 2.

Disable Inband

Management

19. Type “B1”, then “N” to disable inband for Net Port 1. Type

“B2

”

, then “N” to disable inband for Net Port 2.

Select no DS0 for

Inband

Management

20. “L1” and “L2”

are not used because no inband timeslot (DS0) is

reserved for management in this example.

Timing Options

21. From the

Configuration Menu

, select “T” for the

Timing

Options

submenu.

Figure 2-19 Timing Options

22. Type “R”, then “Y”, then refresh the screen by pressing

NTER

Observe that some of the menu items change depending on

whether the

“Receive clock from shelf” option is YES, or NO.

Use the PC, PS, PA, SC, SS, SA, TC, TS and TA commands to

configure the DIDCSU as shown in Figure 2-19.

23. Use “X” to exit to the

E1 Port Configuration Menu

. Then use

“X”

again to exit to the

Configuration Menu

-- DIDCSU 2912 CONFIGURATION MENU (TIMING OPTIONS)--

-- DIDCSU 2912 CONFIGURATION MENU (TIMING OPTIONS)---- DIDCSU 2912 CONFIGURATION MENU (TIMING OPTIONS)--

-- DIDCSU 2912 CONFIGURATION MENU (TIMING OPTIONS)--

Current shelf timing source: Card 2, NET 1 (PRIMARY)

Current shelf timing source: Card 2, NET 1 (PRIMARY)Current shelf timing source: Card 2, NET 1 (PRIMARY)

Current shelf timing source: Card 2, NET 1 (PRIMARY)

Source Slot Number Synchronization Auto Restore

Source Slot Number Synchronization Auto RestoreSource Slot Number Synchronization Auto Restore

Source Slot Number Synchronization Auto Restore

PRIMARY PC) 2 PS) NET 1 PA) YES

PRIMARY PC) 2 PS) NET 1 PA) YESPRIMARY PC) 2 PS) NET 1 PA) YES

PRIMARY PC) 2 PS) NET 1 PA) YES

SECONDARY SC) 2 SS) NET 2 SA) YES

SECONDARY SC) 2 SS) NET 2 SA) YESSECONDARY SC) 2 SS) NET 2 SA) YES

SECONDARY SC) 2 SS) NET 2 SA) YES

TERTIARY TC) 2 TS) INTERNAL TA) YES

TERTIARY TC) 2 TS) INTERNAL TA) YESTERTIARY TC) 2 TS) INTERNAL TA) YES

TERTIARY TC) 2 TS) INTERNAL TA) YES

R) Receive clock from shelf: YES

R) Receive clock from shelf: YESR) Receive clock from shelf: YES

R) Receive clock from shelf: YES

X) exit this screen

X) exit this screenX) exit this screen

X) exit this screen

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 106 107

Komentarze do niniejszej Instrukcji

Brak uwag

Verilink DIDCSU 2912 (880-502646-001) Product Manual Instrukcja Użytkownika Strona 34

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Verilink DIDCSU 2912 (880-502646-001) Product Manual