Verilink PRISM 4001 (34-00244) Product Manual Instrukcja Użytkownika Pobierz pdf (Strona 15)

Installation 2-5PRISM 4001

Connections

SUPV Port Connection

The front panel supervisory port serves two functions. A

modem may be connected to the SUPV port for remote

access or use of the COA (call on alarm) feature. The termi-

nal interface may be accessed through this port.

The SUPV port bit rate is set by configuration Switch Posi-

tion S3-3 and S3-4. The port is a serial RS-232 DCE port

configured for 8 bits, no parity, and 1 stop bit. The physical

connection is an 8-pin modular jack with the following

pinout (see Table 2-S).

NMS Connection

The 4001 is fully compatible with the TxPORT 8100A Site

Controller. The 8100A is a manager that is installed in Slot

1 of the 1051 shelf. A single 8100A can manage up to fifty

4001s or a combination of TxPORT nest-mount units.

Data Port Connections

Both models of the TxPORT 1051 chassis provide connec-

tion to the customer equipment. Each slot of the 1051-2 has

a corresponding DTE 8-pin RJ-48 connector and a high-

speed DTE female 25-pin connector located on the chassis

rear panel. The 1051-3 chassis is similar except that it has a

high-speed DTE 34-pin connector instead of the 25-pin con-

nector. The pinout for the DTE RJ-48 connector is given in

Table 2-T and the pinout for the high-speed DTE connec-

tors is given in Table 2-U.

Table 2-S SUPV Port Connections

SUPV Port

Terminal

Connection

1 DCD Out

2CTS Out

3 Frame Ground

4 Data Out

5 Date In

6 Signal Ground

7RTS In

8DTR In

Table 2-T DTE RJ-48 Pinout

Pin Signal

1 Data Out

2 Data Out

3Not Used

4 Data In

5 Data In

6Not Used

7, 8 Chassis Ground

Table 2-U High-Speed DTE Connector Pinout

ITU/EIA

Circuit

Common Name

DB-25

25-pin

V.3 5

34-pin

DCE

101/AA Frame Ground 1 A Gnd

102/AB Signal Ground 7 B Gnd

103/BA (A) Transmit Data A 2 P In

103/BA (B) Transmit Data B 14 S In

104/BB (A) Receive Data A 3 R Out

104/BB (B) Receive Data B 16 T Out

105/CA Request to Send 4 C In

106/CB Clear to Send 5 D Out

107/CC Data Set Ready 6 E Out

108/CD Data Term Ready 20 H In

109/CF Data Carrier Detect 8 F Out

114/DB (A) Transmit Clock A 15 Y Out

114/DB (B) Transmit Clock B 12 AA Out

115/DD (A) Receive Clock A 17 V Out

115/DD (B) Receive Clock B 9 X Out

113/DA (A) External Clock A 24 U In

113/DA (B) External Clock B 11 W In

141/LLB Local Loopback 18 J In

140/RLB Remote Loopback 21 BB In

142/TM Test Mode 25 K Out

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 33 34

Komentarze do niniejszej Instrukcji

Brak uwag

Verilink PRISM 4001 (34-00244) Product Manual Instrukcja Użytkownika Strona 15

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Verilink PRISM 4001 (34-00244) Product Manual