Verilink WANsuite 5130 (34-00298.L) Product Manual Instrukcja Użytkownika Strona 104

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 263
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 103
3-72 WANsuite 5160/5130
Figure 3.61
Area Details Screen
Area ID
This parameter has the same format as the IP Address of the Mask Address.
Values: 0.0.0.0255.255.255.255
Default: 0.0.0.0
Enable
Displays whether or not this Area is enabled.
Values: Enable, Disable
Default: Enable
Auth Type
Indicates type of Authentication.
Values: Simple, None
Default: None
Stub
An area can be configured as stub when there is a single exit point from the
area, or when the choice of exit point need not be made on a per-external-
destination basis.
Values: Yes, No
Default: No
Address Summary
A configured address range specifies what addresses are contained within an
area. When summarizing the routes in an area to inform other areas, all routes
falling within the configured range are described by a single LSA, thus
decreasing the size of the LSA database.
Values: 0.0.0.0255.255.255.255
Default: 0.0.0.0
Mask Summary
IP Mask of the summary to be added.
Values: 0.0.0.0255.255.255.255
Default: 0.0.0.0
Advertise
Describes the local state of a router or network. This includes the state of the
route’s interfaces and adjacencies. Each link state advertisement is flooded
throughout the routing domain. The collected link state advertisements of all
routers and networks form the protocol's topological database.
Przeglądanie stron 103
1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 262 263

Komentarze do niniejszej Instrukcji

Brak uwag