Verilink WANsuite 5130 (34-00298.L) Product Manual Instrukcja Użytkownika Pobierz pdf (Strona 111)

Web Server Interface 3-79

Static TCP Translation Table Screen

The Static TCP Translation Table screen (Figure 3.70) allows static mapping

of global TCP Server ports to a local host IP address/port combination. The

parameters described below enable access to TCP servers on the private/

corporate network “behind the NAT.” The parameters may be used only when

in NAPT mode.

Figure 3.70

Static TCP Translation Table Screen

Global Port

Decimal IP Port exposed to the global Internet. Default is 0.

Server Port

Decimal IP Port of the local TCP Server. This port is usually the same as the

Global Port. Default is 0.

Server Address

IP Address of the local TCP Server. Default is 0.0.0.0.

The Static TCP Translation Table screen provides the following user-activated

buttons:

You can configure or change the above-listed parameters on the NAT Static

TCP Translation Details screen (Figure 3.71), which is accessed by selecting

the appropriate number under the “Index” column on the Static TCP

Translation Table screen.

Figure 3.71

NAT Static TCP Translation Details Screen

Static UDP Translation Table Screen

The Static UDP Translation Table screen (Figure 3.73) allows static mapping

of global UDP Server ports to a local host IP address/port combination. The

parameters described below enable access to UDP Servers on the private/

Button Function

NAT Details Returns the user to the previous screen.

Add New Lets the user add additional addresses.

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 262 263

Brak uwag

Verilink WANsuite 5130 (34-00298.L) Product Manual Instrukcja Użytkownika Strona 111