Verilink WANsuite 5370 (34-00310.D) Product Manual Instrukcja Użytkownika Strona 114

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 235
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 113
3-84 WANsuite 5370
Figure 3.83
Log Out Screen
In-band Management
There are two ways to implement remote in-band management of a
WANsuite 5370 unit. The first is to use the local router to route management
frames (Web browser or SNMP) between the local LAN and the remote unit.
The second is to use the local WANsuite 5370 unit as an independent
gateway.
Use of Connected Local Router
If you choose this method, no configuration is required in the WANsuite
5370s. Local Router A will route Web/SNMP frames from the PC to the
remote WANsuite 5370s. The remote WANsuite 5370 IP address must be set
within the same network as the remote routers B and C LAN network.
Figure 3.84
Frame Relay Network
If the remote units are required to have an IP address in different Networks
from those of the remote routers, a static route will have to be configured in
the local router (Router A) for each remote WANsuite 5370 to manage. If
Router A becomes unavailable, there is no way to reach the remote
WANsuite 5370s.
Use of Local WANsuite 5370 as a Gateway
If you choose this method, the WANsuite 5370s are totally independent from
the routers, so all units will be accessible as long as the frame relay network
stays up. The IP address assignment is also independent from the routers. The
PC used for management must have the local WANsuite 5370’s IP address as
its gateway address so that it can reach all remote WANsuite 5370s.
PC
Router
A
FSM
FSM
FSM
Router
C
Router
B
WANsuite
5370
WANsuite
5370
WANsuite
5370
Przeglądanie stron 113
1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 234 235

Komentarze do niniejszej Instrukcji

Brak uwag