Verilink WANsuite 7205 (34-00317.B) Product Manual Instrukcja Użytkownika Pobierz pdf (Strona 191)

VT100 Interface 4-69

Static TCP Trans Table Screen

The Static TCP Trans Table screen (Figure 4.62) allows static mapping of

global TCP Server ports to a local host IP address/port combination. The

parameters described below enable access to TCP servers on the private/

corporate network “behind the NAT.” The parameters may be used only when

in NAPT mode.

Figure 4.62

Static TCP Trans Table Screen

Global Port

Decimal IP Port exposed to the global Internet. Default is 0.

Server Port

Decimal IP Port of the local TCP Server. This port is usually the same as the

Global Port. Default is 0.

Server Address

IP Address of the local TCP Server. Default is 0.0.0.0.

The “Add New” prompt lets the user add additional addresses.

You can configure or change the above-listed parameters on the Static TCP

Trans Details screen (Figure 4.63), which is accessed by selecting the

appropriate <Ndx> number on the Static TCP Trans Table screen.

NAT Ports Defines NAT global/Internet and local/corporate

ports.

Static UDP Translation Table Allows static mapping of global UDP Server ports to

a local host IP address/port combination.

Prompt Function

1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 220 221

Brak uwag

Verilink WANsuite 7205 (34-00317.B) Product Manual Instrukcja Użytkownika Strona 191