Verilink WANsuite 7205 (34-00317.B) Product Manual Instrukcja Użytkownika Pobierz pdf (Strona 24)

1-10 WANsuite 7205

NOTICE: For information on pinout assignments for this connector, refer to

page A-8. See Ordering Information on page A-6 for information on

cables for this connector.

Data Interface Module (Rear Panel)

The Data Interface Module (DIM) − or rear connector module − mates with

the associated WANsuite 7205 module and connects it to the data equipment.

As shown in Figure 1.2, the rear panel of the DIM 7205 provides the

following:

• Two RS-232 DB-25 connectors

• Three RJ-48C jacks

• One 8-pin modular 10/100Base-T Ethernet port

The two DB-25 connectors are Serial data ports (labeled

DATA 1 and DATA

), and the two RJ-48C jacks are Network interfaces (labeled NET 3, NET 2,

and NET 1).

Figure 1.2

WANsuite 7205 Rear Panel

10/100 Ethernet

The WANsuite 7205 provides one 10/100 ETHERNET interface for IP

Gateway, SNMP, and Web browser access. This interface is an 8-pin modular

jack that complies with standard twisted-pair, 10/100Base-T requirements.

The 10/100Base-T cable is supplied by the end user. Refer to Ethernet

Connection Pin Assignments on page A-9 for pin assignments and cable

descriptions.

Ethernet LED Indicators

There are two unlabeled indicator LEDs on either side of the 10/100 Ethernet

jack. The LED on the left side of the jack pulses amber to indicate data

activity (either transmit or receive). The LED on the right side of the jack

lights green to indicate that the link layer is operational.

Serial Interfaces

The two SERIAL interfaces (labeled DATA 1 and DATA 2) located on the rear

of the unit are multi-protocol interfaces presented physically as DB-25

connections. The protocols supported by these interfaces are RS-232,

EIA-530, V.35, and X.21.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 220 221

Brak uwag

Verilink WANsuite 7205 (34-00317.B) Product Manual Instrukcja Użytkownika Strona 24