
10 FrameStart DDS CSU/DSU and T1 CSU/DSU and FrameStart FSE
Specifications Chart
Specification DDS CSU/DSU T1 CSU/DSU FrameStart FSE
Network Interface
Line Rate 56 and 72 kbps 1.544 Mbps (±50 ppm) 2.048 Mbps (±50 ppm)
Line Framing DDS I and DDS II CC64K D4 or ESF Unframed, FAS, CAS,
CCS, CRC4
Line Code Bipolar AMI AMI or B8ZS HDB3
Input Signal 0 to −43 dB 0 to −36 dB ALBO 0 to −43 dB
Connection RJ-48S, 135 Ω (±5%) RJ-48C, 100 Ω (±5%) RJ-48C, 120 Ω (±5%)
Dual BNC 75Ω ±5%
Timing Source Network Internal, network Internal, network
Output Signal not applicable 3.0 V (±10%) base–peak
into 100 Ω with protection
3.0 V (±10%) base-peak
into 120 Ω or 75 Ω with
protection
Line Build Out not applicable 0, −7.5, −15, −22.5 dB
attenuation
not applicable
Jitter Control not applicable per TR 62411 and T1.403 per TBR12
Ones Density not applicable B8ZS, Ν×56 bit stuffing,
alternate fill; complies with
TR 62411
not applicable
Equipment Interface
Line Rate 56 kbps or 64 kbps
synchronous
56 kbps to 1.536 Mbps
(±50 ppm)
64 kbps to 2.048 Mbps
(±50 ppm)
Connection -------------> female, 34-pin Winchester-type connector (all units) <-----------
Diagnostics
Performance LOSS, OOSS, and BPVS
monitoring
Monitoring per TR 54016
and T1.403
LOSS, OOFS, ES, AISS,
RAS, SES, DS, UAS,
BPVS, CSS, and CRCES
monitoring
Network Loops Line loop, data loop, and
V.54 loop
Line loopback or payload
loopback
Line loopback or payload
loopback
Fractional Loop not applicable Responds to in-band V.54
loop code
Responds to in-band V.54
loop code
DTE Port Loops local loop local loop local loop
BERT -----------> 511, spaces, marks, and 2047 patterns (all units) <-----------
Standards Compatibility
TR 62310, August 1993 TR 54016, September 1989
TR 62411, December 1990
T1.403, 1995
Komentarze do niniejszej Instrukcji