Verilink WANsuite 5230 (34-00304.F) Product Manual Instrukcja Użytkownika Pobierz pdf (Strona 229)

SNMP Agent B-1

A PPENDIX

PPENDIX

SNMP A

GENT

Introduction

This chapter provides specific information for configuring and using the

SNMP agent within the WANsuite 5260/5230.

The WANsuite 5260/5230 incorporates an Ethernet card that provides

connectivity for LAN-based management stations. The embedded TCP/IP

Protocol Stack allows remote access from both private networks and the

Internet.

SNMP Configuration Parameters

To access the SNMP agent, you must have an SNMP management

application, such as HP’s OpenView

or Sun’s NetManager . Access to the

agent is controlled by three community strings, read-access, write-access, and

trap-access (the community string sent with an SNMP trap). Configuration of

these community strings within the WANsuite 5260/5230 is accomplished via

the HTTP (web browser) interface (Chapter 3, Web Server Interface) or the

VT100 interface (Chapter 4, VT100 Interface).

The defaults for these strings are “public” for read-access, “private” for write-

access, and “public” for trap-access. Ensure that your SNMP management

application is configured for whatever access strings you use.

SNMP MIBs

The WANsuite 5260/5230 supports the following industry-standard MIB

(management information base) files:

• rfc1907.mib − SNMPv2 entities (initial revision published as RFC 1450)

• rfc1573.mib − defines the IANAifType textual convention, and thus the

enumerated values of the ifType object defined in MIB-II’s

ifTable

1 2 ... 224 225 226 227 228 229 230 231 232 233

Brak uwag

Verilink WANsuite 5230 (34-00304.F) Product Manual Instrukcja Użytkownika Strona 229