Verilink WANsuite 5650 (34-00314.E) Product Manual Instrukcja Użytkownika Pobierz pdf (Strona 33)

VT100 Interface 3-11

Figure 3.8

Configuration Details Screen

This screen allows the user to view and change various parameters of the

selected Configuration Profile, which include the following:

Wire Mode

Displays the type of wire interface used by the span (always Two-Wire).

PSD Type

Used to configure the use of symmetric/asymmetric PSD (Power Spectral

Density) mask for the associated line.

Values:

Symmetric, Asymmetric

Default:

Symmetric

Data Rate (Min)

This field is used to set the minimum attainable line rate in the span.

Data Rate (Max)

This field is used to set the maximum attainable line rate in the span.

Remote

This field enables/disables support for remote management of the units in a

SHDSL line from the STU-R via the EOC.

Values:

Enabled, Disabled

Default:

Enabled

Power Feeding

This field enables/disables support for optional power feeding in a SHDSL

line; however, this version of the WANsuite 5650 supports only wetting

current. Other values will have no effect.

Values:

No Power, Power Feeding, Wetting Current

Default:

No Power

Transmission Mode

Used to set the regional setting of the span.

Values:

Annex-A

(ITU-T G.991.2)

, Annex-B

(ITU-T G.991.2)

Default:

Annex-B

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 67 68

Brak uwag

Verilink WANsuite 5650 (34-00314.E) Product Manual Instrukcja Użytkownika Strona 33