Verilink 8100A (34-00237) Product Manual Instrukcja Użytkownika Pobierz pdf (Strona 66)

3-16 8000 Series

Set System Defaults

You may set the IAD to boot from the previously saved custom configuration,

or boot from the factory-supplied configuration file as described below.

1 Type “D” on the Utilities menu. The IAD displays the following menu:

Figure 3.7

System Default Menu

2 Type “1” to set the previously saved custom configuration file as the boot

file

—or—

Type “2” to set the default.st config file as the boot file.

3 The IAD displays a warning and asks you to confirm your decision.

4 Type “Y” to confirm the process. The IAD updates the setting and displays

the Utility menu.

5 Reset the IAD to reboot with the new config file.

Save System Settings as Defaults

To save the current configuration as the custom default configuration, follow

the steps below.

1 Type “W” on the Utilities menu.

When the IAD is configured as a DHCP client, the following question is

asked:

This unit is configured as a DHCP client. Do you

want a defaulted unit to TFTP download a

configuration file from the IP address specified in

the ‘siaddr’ field returned by the DHCP server after

booting?

Press Y to download configuration on boot->

If you type “Y” in answer to this prompt, a defaulted IAD will download its

configuration file via TFTP from a file named MAC-address.cfg on the server

indicated by DHCP information.

2 The IAD displays a warning and asks you to confirm your decision to save

custom defaults.Type “Y” to save the current configuration as custdef.st, a

custom default configuration file.

The IAD saves the custom configuration file and displays the Utility menu.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 310 311

Brak uwag

Verilink 8100A (34-00237) Product Manual Instrukcja Użytkownika Strona 66