Verilink WANsuite 6450 (34-00326) Product Manual Instrukcja Użytkownika Strona 162

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 205
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 161
4-54 WANsuite 6450
Endpoint
Endpoint name (or interface) through which to send the IP packet to reach the
Target IP Address.
Target IP Address
Represents the target network that you want this router to reach.
Values: 0.0.0.0255.255.255.255
Default: 0.0.0.0
Target IP Mask
Mask of the Target IP or network.
Represents the target network that you want this router to reach.
Values: 0.0.0.0255.255.255.255
Default: 0.0.0.0
NOTICE: Setting the Target IP Address and Target IP Mask to 0.0.0.0. defines
THE default route for this unit.
Next Hop IP Address:
IP Address of the next device in the route.
Cost
Cost of using that route.
Values: 065535
Default: 1
Route Status
Indicates whether or not the current route is enabled.
Values: Disable, Enable, Enable and Advertise
Default: Enable
Dynamic Route Table Screen
Access this menu (Figure 4.46) by selecting the “Static Route Table” on the
IP Gateway menu and then selecting Dynamic Route Table. This table shows
both dynamic and circuit tables. Please note that not all parameters are
necessarily defined, depending on whether or not the routes were learned
dynamically. Primarily, the most useful information is included in
"Destination," "If Ndx," and "Mask" columns.
Przeglądanie stron 161
1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 204 205

Komentarze do niniejszej Instrukcji

Brak uwag