Verilink WANsuite 6450 (34-00326) Product Manual Instrukcja Użytkownika Strona 192

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 205
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 191
A-2 WANsuite 6450
T1
Line Rate: 1.544 Mbps (±50 bps)
Line Framing: SF, ESF, or 1.544 Mbits unframed
Line Code: AMI or B8ZS
Receiver Sensitivity: 30 dB of cable loss
Connection: RJ-48 jack at 100 (±10 %)
Output Signal: 3.0 V (±10 %) base-peak into 100
Mode: Short- or long-haul
Jitter Control: per Bellcore Document TA-TSY-000170
Number of DS0s Selectable: From 1 to full T1 (noncontiguous)
Serial Interface
Connection: DB-25 female
DTE Ports: Selectable V.35, V.36, X.21, RS-232, RS-449, or EIA-530
DTE/DCE: Selectable (matching cable required)
Data Rate: Synchronous, nx
64 kbps (where n = 136)
Clocking: Internal, External
Supports RFC 1483, Synchronous PPP, CES via AAL 1
IP Gateway
10/100 Ethernet (IP Gateway or Management)
Protocols: RIP1, RIP2, OSPF
Connection: 8-pin modular
Network Protocol: TCP/IP based networks
Data Rate: 10/100 Mbps
Compatibility: 10/100Base-T
Management Interfaces
Embedded Operations Channel
Embedded messaging to enable management of the SHDSL-related parameters.
10/100 Ethernet
Connection: 8-pin modular
Network Protocol: TCP/IP based networks
Data Rate: 10/100 Mbps
Compatibility: 10/100Base-T
Supervisory Port
Connection: DB-9 female
Przeglądanie stron 191
1 2 ... 187 188 189 190 191 192 193 194 195 196 197 ... 204 205

Komentarze do niniejszej Instrukcji

Brak uwag