Verilink WANsuite 7105 (34-00316.C) Product Manual Instrukcja Użytkownika Pobierz pdf (Strona 161)

VT100 Interface 4-27

DS0 Status and Alarm Table

Each second, the TDM services will count the number of active DS0s and

update their statistics. This table also gives the status (OK, Alarmed) of the

alarms related to DS0s.

The user-activated prompts listed below are at the bottom of the DS0 Monitor

Details screen.

Figure 4.22

Channel Table Details Screen

The Channel Table Details screen lets you establish the Rate, Service, Pair,

and Idle Pattern parameters for any available channel. The screen parameters

are described below.

Rate

The unit can operate at any data rate that is a multiple of 56 or 64 kbps.

Values: 56K, 64K

Default: 64K

Service

Specifies the service to which this channel is allocated. Refer to the Service

Table to see how the current services are configured.

Pair

Channel number from paired service.

Values: 1−24

Default: Current channel number

Prompt Function

Clear Alarms Clears all utilization alarms.

Channels Displays the channel table details for the Network 1, Network

2, or Network 3 services (Figure 4.22).

DS0 24 Hour History Displays DS0 utilization history in 15-min buckets for the

past 24 hours (Figure 4.23).

DS0 30 Day History Displays DS0 utilization history in 24-hr buckets for the past

30 days (Figure 4.24).

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 254 255

Brak uwag

Verilink WANsuite 7105 (34-00316.C) Product Manual Instrukcja Użytkownika Strona 161