Verilink WANsuite 7105 (34-00316.C) Product Manual Instrukcja Użytkownika Strona 214

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 255
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 213
4-80 WANsuite 7105
Figure 4.76
Diagnostics Screen
Description
Describes the type of interface selected for testing.
Loop Type
Describes the type of loop test (if any) performed on the selected interface.
Setting
Displays the bandwidth on which you wish to perform the BERT.
Pattern
Specifies the pattern to be transmitted during a BERT for the selected port.
Length
Displays the length of time for which the BERT should run for the selected
interface.
State
Displays the current BERT state for the selected interface.
Test Details Screens
The Test Details screens let you set some test parameters and view other read-
only parameters. These screens are also used to initiate a BERTs or Loop
Tests. The Network Interface Test Details screen is shown in Figure 4.77, and
its parameters are described below the figure. The Serial Interface Test Details
screen is shown in Figure 4.78, followed by a description of its parameters.
Przeglądanie stron 213
1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 254 255

Komentarze do niniejszej Instrukcji

Brak uwag