Verilink WANsuite 7105 (34-00316.C) Product Manual Instrukcja Użytkownika Pobierz pdf (Strona 38)

3-6 WANsuite 7105

Figure 3.5

Network 2 Screen (Top Portion Only)

Figure 3.6

Network 3 Screen (Top Portion Only)

Function (Network 2

Only)

In the “Slaved” function, Network 2 timing is slaved to Network 1 and the

port operates as a DSX like Network 3. In the “Network” function, Network 2

combines with Serial 2 to operate as an independent DSU/CSU. In the “APS

Backup” function, Network 2 becomes a shadow of Network 1 by functioning

as a backup line for Network APS.

Values: Slaved, Network, APS Backup

Default: Slaved

NOTICE: The “Function” parameter fundamentally affects the operation of the

unit. Even though this parameter is found only on the Network 2 screen,

its setting affects all three Network ports and the Service table.

Mode

Selects the network service type.

Values: Long-Haul, Short-Haul

Default: Long-Haul

Line Build-Out (Long

Haul)

Sets the transmit Line Build Out (LBO) for the Long-Haul Network interface.

Values: 0, −7.5, −15.0, −22.5 dB

Default: 0 dB

DSX Level (Short

Haul)

Specifies the DTE DSX-1 interface output level.

Values: 0−110, 111−220, 221−330, 331−440, 441−550, 551−660, >661 ft

Default: 0−110 ft

Framing

Selects the framing for the Network side of the DSU/CSU.

Values ESF, D4

Default: ESF

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 254 255

Brak uwag

Verilink WANsuite 7105 (34-00316.C) Product Manual Instrukcja Użytkownika Strona 38