Verilink WANsuite 7105 (34-00316.C) Product Manual Instrukcja Użytkownika Strona 246

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 255
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 245
B-2 WANsuite 7105
rfc2863.mib describes generic objects for network interface sub-layers
(This MIB is an updated version of MIB-II's ifTable, and
incorporates the extensions defined in RFC 1229.)
rfc2493.mib provides textual conventions to be used by systems
supporting 15-minute based performance history counts
rfc2115.mib describes the use of a Frame Relay interface by a DTE
rfc2495.mib describes DS1, E1, DS2 and E2 interfaces objects
rfc2011.mib for managing IP and ICMP implementations, but excluding
their management of IP routes
rfc2012.mib for managing TCP implementations
rfc2013.mib for managing UDP implementations
rfc2096.mib for the display of CIDR multipath IP routes
rfc2571.mib the SNMP Management Architecture MIB
The WANsuite 7105 supports the following Enterprise-specific MIBs:
ds8200tc.mib textual conventions used by DS8200 MIB
ds8200v2.mib provides T1 configuration and statistics information
ipadv2.mib provides Frame Relay, PPP, and Service Aware
configuration and statistics
ipstart.mib MIB module for synchronous PPP
router.mib provides configuration of OSPF router
hdsl2.mib MIB module for HDSL
ipaddhcp.mib − ΜΙΒ module for DHCP
ipadnat.mib MIB module for NAT
These MIB files may be found on the Verilink Documentation CD included
with the unit.
SNMP Trap Configuration
The WANsuite 7105 supports up to eight IP destinations for SNMP traps.
These may be configured either through the Web interface or through an
SNMP management application. For configuration of these destinations
through an SNMP management application, use a MIB browser to access the
table trapdest within ipadv2.mib and set the IP addresses of the host
computer running the management application(s). Entering an IP address of
0.0.0.0 will disable the entry.
The following traps are currently defined in the SNMP MIBs supported by
WANsuite. VarBinds heading lists additional information that is sent in the
SNMP trap message to provide details about the event.
NOTICE: The following is a list of traps for all WANsuite products. A specific
trap may or may not be applicable to this particular product.
Przeglądanie stron 245
1 2 ... 241 242 243 244 245 246 247 248 249 250 251 ... 254 255

Komentarze do niniejszej Instrukcji

Brak uwag