Verilink WANsuite 6x30 (34-00315.B) Product Manual Instrukcja Użytkownika Strona 117

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 181
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 116
VT100 Interface 4-19
Figure 4.16
Span Endpoint Maintenance Screen
The Span Endpoint Maintenance parameters are described below.
Loopback Type
Specifies loopbacks for the associated segment endpoint.
Values:
No Loopback, Normal Loopback
Default:
No Loopback
Loopback Timeout
Specifies the timeout value in minutes for loopbacks initiated at segments
endpoints contained in the associated unit. A value of 0 disables the timeout.
Tip Ring
Indicates the state of the tip/ring pair at the associated segment endpoint.
Power Source
Indicates the DC power source being used by the associated unit.
Restart Endpoint
Enables the manager to trigger a soft restart of the SHDSL line at the
associated segment endpoint. The manager may only set this object to the
“restart” value to initiate a restart. The agent will perform a restart after
approximately 5 seconds, and restore the object to the “ready” state.
Values:
Ready, Restart
Default:
Ready
Selecting the “Performance” prompt on the Span Endpoint Details screen will
display the screen shown in Figure 4.17.
Przeglądanie stron 116
1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 180 181

Komentarze do niniejszej Instrukcji

Brak uwag