Verilink WANsuite 6x30 (34-00315.B) Product Manual Instrukcja Użytkownika Pobierz pdf (Strona 88)

3-60

WANsuite 6x30

Server Port

Decimal IP Port of the local UDP Server. This port is usually the same as the

Global Port. Default is 0.

Server Address

IP Address of the local UDP Server. Default is 0.0.0.0.

The Static UDP Translation Table screen provides the following user-

activated buttons:

You can configure or change the above-listed parameters on the Static UDP

Translation Details screen (Figure 3.58), which is accessed by selecting the

appropriate number under the Index column on the Static UDP Translation

Table screen.

Figure 3.58

Static UDP Translation Details Screen

NAT Ports Screen

The parameters on the NAT Ports screen (Figure 3.59) define the NAT

global/Internet and local/Corporate ports. These parameters are configured in

the NAT Ports Details screen shown in Figure 3.60. Access the NAT Ports

Details screen by clicking on the Index number of the desired port on the

NAT Ports screen.

Figure 3.59

NAT Ports Screen

Endpoint

The Endpoint name of the circuit associated with the LAN or WAN port.

Default is LAN for the first port.

Enable

Enables or disables the NAT port. Default is “Enable.”

Button

Function

NAT Details

Returns the user to the previous screen.

Add New

Lets the user add an additional address.

Refresh

Refreshes data on the current page.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 180 181

Brak uwag

Verilink WANsuite 6x30 (34-00315.B) Product Manual Instrukcja Użytkownika Strona 88