Verilink WANsuite 6x30 (34-00315.B) Product Manual Instrukcja Użytkownika Strona 118

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 181
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 117
4-20 WANsuite 6x30
Figure 4.17
Span Endpoint Performance Screen
This screen displays information on the performance and error status of the
span endpoints. This information is provided in summary form for complete
totals and for the most recent 15 min period or most recent current day period.
Status
Current state of the endpoint. This is a bit-map of possible conditions. The
various bit positions are as follows:
1 (noDefect)
There no defects on the line.
2 (powerBackoff)
Indicates enhanced Power Backoff.
4 (deviceFault)
Indicates a vendor-dependent detection of diagnostics or
self-test results.
8 (dcContinuityFault)
Indicates vendor-dependent conditions that
interfere with span powering such as short and open circuits.
16 (snrMarginAlarm)
Indicates that the SNR margin has dropped below
the alarm threshold.
32 (loopAttenuationAlarm)
Indicates that the loop attenuation has
dropped below the alarm threshold.
64 (loswFailureAlarm)
Indicates a forward LOSW alarm.
128 (configInitFailure)
Endpoint failure during initialization due to paired
endpoint not able to support requested configuration.
256 (protocolInitFailure)
Endpoint failure during initialization due to
incompatible protocol used by the paired endpoint.
512 (noNeighborPresent)
Endpoint failure during initialization due to no
activation sequence detected from paired endpoint.
1024 (loopbackActive)
A loopback is currently active at this Segment
Endpoint.
SNR Margin
Current Signal-to-Noise Ratio margin for this endpoint as reported in a Status
Response/SNR message.
Loop Attenuation
Current loop attenuation for this endpoint as reported in a Network or
Customer Side Performance Status message.
Przeglądanie stron 117
1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 180 181

Komentarze do niniejszej Instrukcji

Brak uwag