Verilink WANsuite 6x30 (34-00315.B) Product Manual Instrukcja Użytkownika Pobierz pdf (Strona 87)

Web Server Interface

3-59

Server Port

Decimal IP Port of the local TCP Server. This port is usually the same as the

Global Port. Default is 0.

Server Address

IP Address of the local TCP Server. Default is 0.0.0.0.

The Static TCP Translation Table screen provides the following user-activated

buttons:

You can configure or change the above-listed parameters on the Static TCP

Translation Details screen (Figure 3.58), which is accessed by selecting the

appropriate number under the Index column on the Static TCP Translation

Table screen.

Figure 3.56

Static TCP Translation Details Screen

Static UDP Translation Table Screen

The Static UDP Translation Table screen (Figure 3.57) allows static mapping

of global UDP Server ports to a local host IP address/port combination. The

parameters described below enable access to UDP Servers on the private/

corporate network “behind the NAT.” The parameters may be used only when

in NAPT mode.

Figure 3.57

Static UDP Translation Table Screen

Global Port

Decimal IP Port exposed to the global Internet. Default is 0.

Button

Function

NAT Details

Returns the user to the previous screen.

Add New

Lets the user add additional addresses.

Refresh

Refreshes data on the current page.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 180 181

Brak uwag

Verilink WANsuite 6x30 (34-00315.B) Product Manual Instrukcja Użytkownika Strona 87