Verilink WANsuite 6x30 (34-00315.B) Product Manual Instrukcja Użytkownika Strona 156

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 181
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 155
4-58 WANsuite 6x30
NAT IP Address
Translated IP Address of the host.
Tx Packets
Number of packets sent from NAT.
Processed Packets
Number of packets processed by NAT for this address.
Static UDP Translation Table Screen
The Static UDP Translation Table screen (Figure 4.56) allows static mapping
of global UDP Server ports to a local host IP address/port combination. The
parameters described below enable access to UDP Servers on the private/
corporate network “behind the NAT.” The parameters may be used only when
in NAPT mode.
Figure 4.56
Static UDP Translation Table Screen
Global Port
Decimal IP Port exposed to the global Internet. Default is 0.
Server Port
Decimal IP Port of the local UDP Server. This port is usually the same as the
Global Port. Default is 0.
Server Address
IP Address of the local UDP Server. Default is 0.0.0.0.
You can configure or change the above-listed parameters on the Static UDP
Translation Details screen (Figure 4.57), which is accessed by selecting the
appropriate number under the <Ndx> column on the Static UDP Translation
Table screen.
Przeglądanie stron 155
1 2 ... 151 152 153 154 155 156 157 158 159 160 161 ... 180 181

Komentarze do niniejszej Instrukcji

Brak uwag