Verilink WANsuite 6x30 (34-00315.B) Product Manual Instrukcja Użytkownika Strona 39

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 181
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 38
Web Server Interface
3-11
Definitions of the timing sources are as follows:
Internal
– The unit’s internal frequency standard (E1 2.048 Mbps ± 50 bps)
is used for all timing.
Network
– Timing is derived from the Network port recovered clock.
CRC4 Mode
Provides line integrity detection to determine if bit errors are present on the
line.
Values:
Disable, Enable
Default:
Disable
The Error Status and Alarm Threshold Table (page 3-6) and the Performance
Screens (page 3-8) related to the 6230 Network screen are the same as those
related to the 6130 Network screen.
WANsuite 6430 (G.SHDSL) Network Screen
The WANsuite 6430 Network screen (Figure 3.9) lets you view and make
changes to the Network interface's configuration. In addition, this screen
provides a table that displays the alarm values for the Network interface.
Figure 3.9
WANsuite 6430 Network Screen
The Network screen configuration parameters are described in the following
paragraphs.
Unit Type
Selects the unit type. TU-R represents a CPE terminal unit; TU-C represents a
CO terminal unit.
Values:
TU-R, TU-C
Default:
TU-R
Expected Repeaters
Provisions the number of repeaters in the selected span.
Values:
0 (zero)
Default:
0 (zero)
Przeglądanie stron 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 180 181

Komentarze do niniejszej Instrukcji

Brak uwag