
Web Server Interface
Figure 3.34
Rule Config Screen
The paragraphs below describe the rule configuration parameters and their
Selects the service to which the rule applies. Select from a pull-down menu
that lists available services.
Selects the VPI to which the rule applies.
Selects the VCI to which the rule applies.
Enables or disables filtering of the IP traffic in accordance with the specified
NOTICE:
To use this filter, you must specify both the Service and VPI/VCI
parameters in the Rule Config screen.
Establishes the IP address by which the rule will filter IP traffic (if enabled).
Represents a range of IP addresses defined so that only machines with IP
addresses within the range defined by the mask are allowed to access an
Internet service. To mask a portion of the IP address, replace it with the wild
card character “0” (zero). (For example, 192.44.0.0 represents every computer
on the Internet with an IP address beginning with 192.44.)
Enables or disables filtering of the IP traffic by the IP address specified in the
IP Address or IP Mask field.
Establishes the IP port by which the rule will filter IP traffic (if enabled).
Enables or disables filtering of the IP traffic by the IP port specified in the IP
Komentarze do niniejszej Instrukcji