Verilink WANsuite 6x30 (34-00315.B) Product Manual Instrukcja Użytkownika Pobierz pdf (Strona 153)

VT100 Interface 4-55

Static TCP Translation Table Screen

Select the Static TCP Translation Table prompt at the bottom of the NAT

Details screen to bring up a screen (Figure 4.51) that allows static mapping of

global TCP Server ports to a local host IP address/port combination. The

parameters described below enable access to TCP servers on the private/

corporate network “behind the NAT.” The parameters may be used only when

in NAPT mode.

Figure 4.51

Static TCP Translation Table Screen

Global Port

Decimal IP Port exposed to the global Internet. Default is 0.

Server Port

Decimal IP Port of the local TCP Server. This port is usually the same as the

Global Port. Default is 0.

Server Address

IP Address of the local TCP Server. Default is 0.0.0.0.

You can configure or change the above-listed parameters on the Static TCP

Translation Details screen (Figure 4.52), which is accessed by selecting the

appropriate number under the <Ndx> column on the Static TCP Translation

Table screen.

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 180 181

Brak uwag

Verilink WANsuite 6x30 (34-00315.B) Product Manual Instrukcja Użytkownika Strona 153